Stone Bead Strand Size & Yield Planner

How many beads you get from a single strand decides everything downstream: how many bracelets you can finish, how many strands to order, and how much waste to plan for. This planner answers that question first, then works through strand capacity, per-project yields, the size choices on the product page and the buying decisions behind one 38cm strand of Golden Silk Stone. It is written for makers and shop owners who buy smooth round stone beads in volume and want one dependable reference every time they cut a 6-10mm bead strand.

Shop the 38cm Strand Contact Us

Golden Silk Stone Smooth Round Beads Strands, Approx 6-10mm, 38cm/strand

One Strand, Four Numbers to Plan Around

These are the figures that drive every calculation on this page. Keep them next to your order sheet.

Approx. 38cm / 15in Standard strand length sold on the product page.

Approx. 35–45 beads Count on the mixed 6–10mm strand as supplied.

Strung & double-knotted Arrives ready to cut, arrange and thread.

Wholesale from 100+ strands Sample and bulk terms available on request.

Beads Per Strand by Size

The mixed strand figure is stated on the product page. The single-size rows are calculated from the standard 38cm length so you can extrapolate to any size you cut.

Nominal bead size	Strand length	Approx. beads per strand	Stringing note
6mm	38cm / 15in	60–64 (calculated)	Delicate layer; check your chosen cord against the hole.
8mm	38cm / 15in	46–48 (calculated)	Everyday weight; suited to most jewelry wire and cord.
10mm	38cm / 15in	36–39 (calculated)	Bold look; use a heavier wire or cord for support.
Mixed 6–10mm (as supplied)	38cm / 15in	Approx. 35–45 beads (stated)	One strand carries several sizes, so plan on the lower end.

How the count is calculated Approximate bead count = strand length ÷ bead diameter, less a small allowance for string, knots and drill spacing. At 380mm of usable strand that gives roughly 63 beads at 6mm, 47 at 8mm and 38 at 10mm. A mixed strand holds fewer than a single-size strand because the larger beads occupy more of the length — which is why the stated range is 35–45 beads. Treat all derived figures as estimates and confirm with your first strand.

How Far One Strand Goes

Turn capacity into a purchase order. Each row converts a finished piece into strand length used and strands to buy, rounded up so you are never short mid-project.

Finished piece	Strand length used	Strands to buy	Buyer decision
Stretch bracelet, 18cm / 7in	Approx. 36cm for two	1 strand per 2 bracelets	Order in pairs of bracelets to keep waste near zero.
Knotted bracelet, 18cm	Approx. 36cm plus knot spacing	1 strand per 2 bracelets	Knots consume length, so keep a spare strand on hand.
Necklace, 45cm	Approx. 1.2 strands	2 strands	Buy 2 so the clasp area and any rework stay covered.
Necklace, 60cm	Approx. 1.6 strands	2 strands	Two strands leave enough for a matching pair of earrings.
Earring pair	Approx. 4 beads	Well under 1 strand	Use earrings to absorb leftover beads from a necklace build.
12-piece bracelet batch	Approx. 216cm	6–7 strands	Round up to 7; a larger run moves you toward wholesale terms.

Planning margin Add one extra strand for every ten you order. Mixed sizes, knotting and clasp transitions all eat a little length, and a spare strand keeps a batch consistent in colour and size rather than forcing you to substitute mid-run.

Choose Your Size Before You Count Strands

The strand is sold as a mixed 6–10mm lot, and the product page also lets you select 6mm, 8mm or 10mm. Pick the size that matches the piece you make most, then use the counts above to size the order.

Fine, Layered Work

Approx. 60–64 beads per 38cm strand. Best for delicate stacking bracelets, thin layered necklaces and small accent earrings where a light look matters more than coverage.

Select 6mm on the product page →

The All-Rounder

Approx. 46–48 beads per 38cm strand. The safest default for stretch bracelets and mid-weight necklaces, and the size most makers reorder once a design sells.

Select 8mm on the product page →

Statement Pieces

Approx. 36–39 beads per 38cm strand. Choose it for chunky necklaces, bold single-strand bracelets and keychain or bag-charm designs that need visual weight.

Select 10mm on the product page →

Golden Silk Stone smooth round beads in mixed 6-10mm sizes on a 38cm 15-inch strand

Worked Example: Golden Silk Stone, Item JT183

A natural golden silk stone strand — a variety of yellow jade — cut as smooth rounds in mixed sizes and polished to a silky, high-gloss finish. The warm honey-gold, champagne and butterscotch tones run through the strand, so the mixed sizing reads as organic variation rather than mismatch.

Natural and untreatedThe page states authentic yellow jade with no dyes and no synthetics, and the specification lists no treatment.
Mixed 6–10mm with organic variationSubtle size differences give a necklace or bracelet a less uniform, more hand-made look without extra sorting.
Silky, high-gloss polishA smooth round silhouette with a soft warm glow that reflects light gently rather than glaring.
Ready to useEach strand is strung and double-knotted for safe shipping, then hand-selected for even colour distribution.
Durable enough for everyday wearSuited to bracelets, necklaces and gifts that get worn, not just displayed.

Care instructions

Clean gently with a soft, damp cloth. Avoid ultrasonic cleaners, harsh chemicals and prolonged water exposure. Store the strand away from harder gemstones to prevent scratching. The product page lists the strand at $4.67 with a 5-piece minimum order and a CNY / USD currency toggle.

Specification Sheet

Confirm these details against your own design requirements before ordering in volume.

Item no.	JT183
Material	Natural Golden Silk Stone (yellow jade)
Shape	Smooth round
Sizes	Mixed, approx. 6mm to 10mm; 6mm, 8mm and 10mm also selectable
Strand length	Approx. 38cm (15 inches)
Bead count	Approx. 35–45 beads per strand (mixed sizes)
Hole size	Compatible with most jewelry wire and cord
Grade	AA
Treatment	No treatment
Finish	High-gloss polished, silky luster
Colour range	Honey-gold, champagne, butterscotch, soft amber, creamy yellow, pale gold
Durability	Listed as durable for everyday wear
Type	Loose beads
Packaging	One full strand, strung and double-knotted
Minimum order	5 pcs
Wholesale	Pricing available for orders of 100+ strands; contact for a custom quote

Match Your Project to the Right Specification

Find the scenario closest to your work, then follow the specification and the buying decision that goes with it.

Market and craft-fair bracelets

SpecificationMixed 6–10mm strand, 8mm as the working average, high-gloss finish so pieces photograph well.

DecisionBudget one strand per two 18cm stretch bracelets and buy in multiples of two strands to keep colour consistent across the batch.

Statement necklaces for retail

Specification10mm selection for visual weight, or the mixed strand strung onto heavier wire for a graduated look.

DecisionA 45cm necklace needs about 1.2 strands and a 60cm necklace about 1.6, so order two strands per piece and use the remainder for earrings.

Workshop and class kits

SpecificationOne mixed 6–10mm strand per student, so every kit contains a spread of sizes and colours.

DecisionOrder one strand per student plus 10 percent spare, and confirm the 5-piece minimum and shipping timeline before booking the class.

Colour-matched collections

SpecificationThe honey-gold to pale gold range within one untreated strand, hand-selected for even colour distribution.

DecisionBuy the full run in one order so the tones stay consistent between pieces; keep spare strands reserved for replacements.

Gift and packaging add-ons

SpecificationSmall bead counts per piece — roughly four beads for an earring pair — drawn from leftover strand length.

DecisionPlan gift items from leftovers rather than fresh strands, and keep one unopened strand as a matched reserve.

Wholesale and resale stock

SpecificationRepeatable 38cm strands in AA grade, untreated, with consistent 35–45 bead counts per strand.

DecisionMove to the 100+ strand wholesale tier, request a sample strand first, and confirm custom quote details with the team.

Request a Quote for Bulk Strands

The mixed 6–10mm strand has a 5-piece minimum order, and wholesale pricing applies from 100 strands upward. Send your requirements and the team will come back with a custom quote, including sample strands and lead times.

Strand count and the sizes you need most — 6mm, 8mm, 10mm or the mixed lot
Target stone and finish, plus any colour-matching notes for your range
Packing, labelling and delivery destination for the shipment
Sample strand request before you commit to a bulk order

Ready to order or customise?

Use the contact form for bulk pricing, custom quotes and sample requests. Quote requests are handled directly by the sales team.

Frequently Asked Questions

how many beads are on one 38cm strand?

the mixed 6–10mm strand carries approximately 35–45 beads. a single-size strand holds more of the smaller beads: roughly 60–64 at 6mm, 46–48 at 8mm and 36–39 at 10mm, based on the standard 38cm length and a small allowance for string and knots.

can i choose 6mm, 8mm or 10mm instead of the mixed sizes?

yes. the product page includes a size selector listing 6mm, 8mm and 10mm alongside the mixed strand, so you can order the size that matches your designs rather than sorting mixed beads yourself.

how many bracelets can i make from a single strand?

one 38cm strand makes about two 18cm (7in) stretch or knotted bracelets. a batch of twelve bracelets needs roughly six to seven strands, so round up to keep spare beads for rework.

what is the minimum order, and when does wholesale pricing apply?

the minimum order is 5 pcs. wholesale pricing is available for orders of 100+ strands, and the team provides a custom quote on request through the contact page, including sample strand enquiries.

is the golden silk stone treated, dyed or synthetic?

the product page states that the stone is authentic yellow jade with no dyes and no synthetics, and the specification lists no treatment. it is supplied as aa grade loose beads with a high-gloss polished finish.

is the strand ready to use, and how should i care for it?

each strand arrives strung and double-knotted, so you can simply cut, arrange and create. clean gently with a soft, damp cloth, avoid ultrasonic cleaners, harsh chemicals and prolonged water exposure, and store the beads away from harder gemstones to prevent scratching.

Sign In

Currency

Stone Bead Strand Size & Yield Planner